Explosion-proof power junction box

The explosion-proof power junction box is used to connect the power cable with the heating cable in the explosion-proof area.

Explosion-proof marking: "ExeII.CT6Gb", which is suitable for use in the factory explosive gas mixing group after matching the electric heat tracing.

Main technical parameters:

1. Rated voltage: AC 220 V/ 380 V
2. Rated Current: 40A
3. Cable Nozzle Thread: G3/ 4"
4. Explosion-proof brand: Exe II.C T6 Gb
5. Rubber Cable Seal Diameter: 11.7mm

Product Considerations

1. If the junction box housing is found to be deformed, cracked, or damaged, it should be suspended.
2. During installation, you should avoid short circuits between the heating wire, the outer stranded copper wire, and the center wire.
3. Unused inlet holes should be plugged with the enclosed steel plate.