Heat-resistant pressure-sensitive adhesive tape, also known as fixing tape, is a type of tape formed after coating a special adhesive based on fiberglass tape.
In the electric heat tracing system, after the installation of the electric heat tracing, the heat tracing tape is firmly fixed with the heat-resistant pressure-sensitive adhesive tape every 300mm crosswise along the pipe, and the length of the equipment depends on the length of the heat tracing pipe.
Aluminum foil tape is a type of tape formed by coating a special adhesive on the base of aluminum foil tape. In an electric heat tracing system, after the electrical traces are installed, the aluminum foil tape is attached to the pipe or tank in the direction of the electrical heat trace.
It consists of a 10 mm wide and 1.0 mm thick stainless-steel strip of continuous length and fixing screws. You can connect accessories such as junction boxes to pipes. The steel belt can be cut according to the pipe diameter and actual length required. When installing, tighten the set screws, i.e. to fix the junction box or other fittings on the pipe. When ordering, the number of set screws and the total length of steel purlin required should be provided, and the length of each steel purlin is 1.1 times the circumference of the outer wall of the fixed steel pipe.
The stainless-steel adjustable buckle is used with stainless steel ties to adjust and fix.
703 glue is a silicone rubber adhesive sealant, which can be stored in metal hoses, non-toxic, non-polluting, and non-corrosive on metal. 703 room temperature vulcanized silicone rubber not only has exceptional high strength, lower temperature and aging resistance, excellent electrical insulation, and moisture and shock resistance, but also has excellent adhesion, can widely bond a variety of metals and non-metals, plastic and rubber. It is suitable for bonding and sealing various electronic components, meters, instruments and water meters, and can also stick nameplates.